Procédé de fabrication d'un dispositif de pressage de bobine lâche à bande de cuivre rouge

The utility model discloses a red copper strip unwinding and pressing device, which comprises a unwinding stand. The top of the groove cavity of the unwinding stand is provided with a guiding pressure roller. The roller shaft ends of the two ends of the pressure roller are respectively connected to the lug plates on both sides of the lower U-shaped frame plate in rotation, respectively, the lower U-shaped frame plate is fixedly connected to the tail ends of the lug plates on both sides of the upper U-shaped frame plate, and the ears on both sides of the upper U-shaped frame plate The plate is slidingly inserted and installed on the beam plate. A shaft end seat is fixedly installed at the middle position of the top surface of the beam plate. The shaft end seat is rotated and connected to the bottom end of the adjusting shaft. The adjusting shaft is provided with a threaded thread. , Threaded connection between the threaded thread and the upper U-shaped frame plate. By adopting the technical scheme, the structure is simple, the assembly and installation are convenient, the pressing height position of the guide pressing roller is easy to adjust, and it is suitable for the use of loose coils of copper strips with reduced layers of different layers, and the operation and application are convenient. Poop. 

Veuillez nous contacter à zhang@pride-cnc.com